- * Fitment: Compatible for Nissan S13 Silva Japan Market 89-93, compatible for Nissan S13 180SX Japan Market 89-98, etc
- * High Tensile Strength Performance Spring: Front: 8 kg/mm (448 lbs/inch), Rear:7 kg/mm (392 lbs/inch); Tested under a 600,000 time continuous compression test, the spring distortion was less than 0.04%
- * Adjustable Performance: Able to lower ride height by 1''-3''; 24 ways Adjustable Damper
- * Twin-Tube Shock Design: Used for low internal frictional resistance in order to increase efficiency and keep shock temps low
- * Al6061-T6 Material: Most components of the suspension parts are made from 6061-T6 aluminum to increase strength and rigidity
MXR-SLC based on MXR-SNA coilovers, which is also height adjustable but adds damping adjustment ability by a knob the top of the shaft. They are also made for street use, but the 24 level rebound damping control allows you the ability to perfectly dial in your coilover setup. You will experience better ride quality in all road conditions.
Compatible for Nissan S13 240SX 89-94 USA
Compatible for Nissan S13 200SX 89-93 Europe
Compatible for Nissan S13 Silvia 88-93 Japan
Compatible for Nissan S13 180SX 89-99 Japan
Compatible for Nissan S13 Sileighty 98 Japan
Top mounts: pillow ball top mount with camber plate front, standard rubber top mount rear
Damping: 24 levels rebound damping adjustable
Front Spring Rate: 8kg/mm(448lbs/in)
Rear Spring Rate: 7 kg/mm (392lbs/in)
Adjustable Height: Yes lowering 1" to 3"
Shock type: Twin tube
Spring Preload: 7-10 mm
product included: complete coilovers 2 front and 2 rear,a pair wrench for height adjustment.
Gross weight: 24.1kg
Package size: 62*52*21cm
1. Lowered height adjustment from 1" - 3" which allow lower center of gravity and also add a more aggressive stance.
2.Camber plate top mounts help to eliminate the need for a separate camber kit.（Front Only)
3.Pillow ball top mount - It improves the steering feel and response.（Front Only)
4. Rubber top mounts help to deliver a smooth and forgiving ride for city use at any speed and rubber joints assist in absorbing hard impacts. (only rear)
5. Twin-Tube structure allows sufficient stroke within the shock absorber.
6. Complete Suspension Kit of 4 Shock Absorbers & 4 Springs for an easy installation.
7. Separate height adjustment does not affect damper stroke.
8. Height can be adjusted with coilovers installed on the vehicle.
9. High Tensile performance spring - STRESS TESTED OVER 600,000 times while the spring distortion is less than 0.04%. Plus the special surface treatment improves the durability and performance.
10. Height Adjustment tools included.
11. Full rebuildable.
12.A 24 rebound dampening adjustment level allows you the ability to perfectly dial in your coilover setup. You will experience better ride quality in all road conditions.
Enter your destination to get a shipping estimate.