Adj. Damper Full Set compatible for HONDA CR-V 1996-2001 Coilover Absorber Kit Red lowering kit

Introduction

A coilover is an automobile suspension device. Thanks to built-in adjustability, coilovers offer the ability to be shortened or lengthened - lowering or raising the ride height of your vehicle through manual adjustment, without complex electronics or hydraulics. A coilover kit consists of a damper and a shock absorber with a coil spring around it. Maxpeedingrods provides performance aftermarket adjustable coilovers suspension kit compatible for Honda CR-V series. You can enjoy a comfortable riding experience in all road conditions.

Application

Compatible for Honda CR-V 1996-2001 1st Gen. RD1-RD3  compatible for FWD & AWD
Notice: The coilovers kit will "Lower your car" and does not keep to the original ride height.

Specification

Product included: Complete coilovers 2 front and 2 rear +a pair wrench for height adjustment 

Top mounts: Standard rubber top mount front and rear

Adjustable damper: 24 ways adjustable damper force

Adjustable height: Yes, lowering 1'' to 3''

Spring rate front: 10kg/mm(560 lbs/in)

Spring rate rear: 7 kg/mm (392 lbs/in)

Spring preload: 7-10 mm

Shock type: Twin tube

Color: Red

Warranty: one year warranty for any manufacturing defect

Features

- Rubber top mounts front and rear help to deliver a smooth and forgiving ride for city use at any speed, and rubber joints assist in absorbing hard impacts. 

- Able to lower ride height by 1''-3''; allows user to have a more aggressive stance.

- Coilovers are 24-way adjustable. Rebound and Dampening adjustment which allows the user the ability to dial in your coilovers to any driving needs. The user can enjoy a comfortable riding experience in all road conditions.

- Twin-Tube Shock design is used for low internal frictional resistance in order to increase efficiency and keep shock temps low.

- Height adjustment does not sacrifice damper stroke length.

- These coilovers are able to have their height adjusted without being taken out of the car.

- Most components of the suspension parts are made from 6061-T6 aluminum to increase strength and rigidity.

- High Tensile strength performance spring---Tested under a 600,000 time continuous compression test, the spring distortion was less than 0.04%. Plus, the special surface treatment improves the durability and performance.

- Adjustment tools included in the kit.

Notice