T3 T4 Turbo .63 A/R Oil Hybrid V Band Universal Turbocharger for 4 6 Cyl tcd

  • * Fitment: Perfect for 1.5-2.5L any 4/6 cylinder engines
  • * Horse Power: Capable of boosting horse power up to 420HP. This is a cost-effective turbocharger that will increase the users car's power output by 20-40%.
  • * Turbine Housing Material: Ductile Iron QT450-10; temperature resistant up to 700℃
  • * Turbine Impeller Material: K418 Alloy; high oxidation resistance & stability (resistance up to 900℃)
  • * Cast Aluminium Blades: Great airtight seal, airflow, light weight, and corrosion resistant
  • * Excellent Design: Durable floating bearing structure & high-precision blade dynamic balance
  • * 100% Balancing Test: This turbocharger you will receive has been balanced using the VSR machine technology
Item Number 3002906149
Stock In Stock

Combination offer

  • A
  • B
  • C
  • D
  • E
  • F
  • G
GGTT3-VL
GGTT3-VL
1
Cost effective turbocharger give your car 20-40% power than a non-turbo car of the same year, make and model
2
Ductile Iron QT450-10, the material used for the exhaust housing, is temperature resistant up to 700℃
3
K418 Alloy, the material used for the exhaust impeller, has high oxidation resistance & stability (resistance up to 900℃)
4
The cast aluminium blades are great airtight seal, airflow, light weight, and corrosion resistant

Introduction

Are you trying to put together a cost effective turbocharger system for your vehicle? You should know a turbocharged car has about 20-40% more total power than a non-turbo car of the same year, make and model. Well, Maxpeedingrodsentry level universal turbo got just what you're looking for. Maxpeedingrods aftermarket replacement turbo provide the perfect solution by delivering a high-quality turbo at a budget-friendly price.

Application

Perfect for all 4 or 6 CYL, 1.5-2.5L engines(If it exceeds this range, it will cause damage to the turbo)
Horse Power: Capable of Boosting Horse Power up to 420HP
Bearing: Journal Bearing
Maximum PSI 18(1.2Bar)

Specification

Exhaust Inlet (Turbo Manifold) Flange: T3 T4 4 bolt Flange Patterns
Exhaust Outlet (Downpipe) Flange: V-Band Flange
Bearing: Journal Bearing
Cooling Type: Oil Cooled
Wastegate: Internal Wastegate
Compressor:
Trim: 48.1
A/R: 0.5
Inducer: 52.7
Exducer: 76
Turbine:
Trim: 74.2
A/R: 0.63
Inducer: 64.8
Exducer: 55.8
Oil Inlet: M12*1.25 & 2*M8*1.25
Oil Outlet: 2*M8*1.25
Turbine exhaust outlet : 79mm
Turbine exhaust inlet:44.7mm/85.8mm
Compressor outlet:78 mm
Compressor inlet:51.5 mm

Features

-100% BALANCING TEST,This Turbocharger you will receive has been balanced using the VSR machine technology.
- Turbine housing:Ductile iron QT450-10 shell with high-temperature resistance up to 700 degrees Celsius.
- Steel Turbine Wheel:Made from the special K418 alloy to achieve high oxidation resistance and stability under high temperatures up to 900 degrees Celsius.
- Compressor housing:ZL104 aluminum.
- Compressor wheel/blades:
Cast Aluminium with good gas tightness and corrosion resistance.
-High Quality Material.
-Boost Engine Horsepower Significantly.
-Increase Engine Power and Torque Outpout.
-Maintain Combustion Chamber Pressure and Fuel/Air Load.
-Built for Durability and Strength.
-Warranty: one year warranty for any manufacturing defect.

Notice

* Replace, repair or reconnect air cleaner element per manufacturer's manual to avoid compressor wheel damage.
* Make sure the oil drain line is lower than the turbo itself.
* Gasoline car must install a water cooling device to avoid overheating.
* Ensure exhaust outlet are well sealed by welding.
* Please check the specifications carefully before bidding. If you are not sure about these information, please feel free to contact us.
* This is universal application turbo, so modification might be required for some vehicles.
* Professional installation is highly recommended.
* Additional parts will be needed for a complete installation. Please consult professional turbo installer for details.

Write a review

Add photos(0/4)

Note: HTML is not translated!
    Bad           Good

Enter your destination to get a shipping estimate.


CONTINUE
*

*Please select a category!

Recommended By
 
"This one has the Billet wheel on it while the other one has the cast and this should spin a lot more efficiently."
--YoungStatic
152K subscribers
 
 
"We're at 16 pounds of boost right now and it's making 500 horsepower so I'm really happy with it."
--Texas Honda Channel
44.7K subscribers
 
 
"This is cnc machined and generally billet wheels such as this one it'll keep the charge temperatures cooler which theoretically would make more horsepower."
--Matthew Chevalier
26.5K subscribers
 
 
"More durable, probably gives you more power and it looks cool in your engine bay."
--FRANCHIZE-EK3 (REDGEAR
14.8K subscribers
 
 
"These turbos now are absolutely sick and reliable I know people that have ran these 200 300 kilowatts and are still running them no issues."
--Rex H
13.1K subscribers
 
 
"I've ran numerous nine second passes with these turbos and have had no problems with them."
--Robby V's Garage
13.1K subscribers
 
 
"This appears to be a nice unit, that will be a good step towards boosting my Iroc-Z with a $200 Turbo!!!"
--GreenLightFilming
47.2K subscribers
 
 
"Yeah it looks like it's a pretty good turbo it's got the the gold Billet upgraded wheels that all the new Max speeding rods high performance turbos have and I believe they're balanced as well yeah it's balanced."
--Rex H
13.1K subscribers