Rear LowerFront Upper Control Arms + Rear Camber Kit For 96-00 compatible for Honda Civic

Package included

1 Pair of Rear Lower Control Arms
1 Pair of Front Upper Control Arms
1 Pair of Rear Camber Adjustable Kit

Feature

1. improving stability
2. Improves Suspension, Handling, Predictable Response, and Prevents Premature Tire Wear
3. Corrects geometry for proper alignment and improved handling.

Note

Instruction is not included.Professional installation is highly recommended!

Note

All modifications must be installed by licensed mechanics and in compliance with your local modification regulations

Application

Compatible for Honda Civic 1996-2000 EK3/EK4/EK5/EJ6/EJ7/EJ8/EJ9/EM1

Specification

Front Upper Control Arms
1.Material:Carbon Steel
2.Finish:Powder Coated
3.Placement on Vehicle:Front, Upper
4.Pre-Assembled Ball Joint:Yes
5.Ball Joint Lubrication:Pre-lubricated
6.Ball joint with dust boot:Yes
7.Ball joint with grease fitting:NO
8.Bushing Material:Rubber
9.Bushing Type:One-piece Bushing
10.Bushing Lubrication:Pre-lubricated
11.Bushing Grease Fitting Type:NO
12.Control Arm Type / Construction:Tube Type, Adjustable Camber
13.Fitment Type:Direct Replacement, Bolt-on
14.Ball Joint Included:Yes
15.Bushing Included: Yes
16.Eye-to-eye length:168mm/6.61"
17.Bushing Inner Diameter:10.8mm
18.Bushing Outer Diameter:34.6mm
19.Bushing Width:47.7mm
Rear Lower Control Arm
1.Material:Aluminum
2.Finish：Surface Anodic Oxidation
3.Placement on Vehicle: Rear Lower
4.Bushing Material:Poly
5.Bushing Type: Split-type Bushing
6.Bushing Lubrication:Pre-lubricated
7.Bushing Grease Fitting Type:NO
8.Fitment Type:Direct Replacement, Bolt-on
9.Bushing Included:Yes
10.Eye-to-eye length :321.5mm/12.66"
11.Bushing Inner Diameter:10.2mm
12.Bushing Outer Diameter:20.2mm
13.Bushing Width:38，48mm
Rear Camber Control Arm
1.Material:Carbon Steel
2.Finish:Powder Coated
3.Placement on Vehicle:Rear
4.Bushing Material:Rubber
5.Bushing Type:One-piece Bushing
6.Bushing Lubrication:Pre-lubricated
7.Bushing Grease Fitting Type:NO
8.Fitment Type:Direct Replacement, Bolt-on
9.Eye-to-eye length range:152mm-215mm/5.98"-8.46"
9.Bushing Included:Yes
10.Bushing Inner Diameter:10mm
11.Bushing Outer Diameter:34mm
12.Bushing Width:40mm

Notice

All modifications must be installed by licensed mechanics and in compliance with your local modification regulations