Rear End Disc Brake Conversion Kit compatible for Chevrolet Chevelle Buick Skylark 1964-72

Application

Compatible for Buick Skylark 1964 - 1972
compatible for Buick Special 1964 - 1969
compatible for Chevrolet Camaro 1967
compatible for Chevrolet Chevelle 1964 - 1972
compatible for Chevrolet El Camino 1964 - 1972
compatible for Chevrolet Malibu 1964 - 1967
compatible for Chevrolet Monte Carlo 1970 - 1972
compatible for Oldsmobile 442 1964 - 1971
compatible for Oldsmobile Cutlass 1964 - 1972
compatible for Oldsmobile F85 1964 - 1972
compatible for Oldsmobile Vista Cruiser 1964 - 1972
compatible for Pontiac Firebird 1967
compatible for Pontiac GTO 1964 - 1972
compatible for Pontiac Lemans 1964 - 1972
compatible for Pontiac Tempest 1964 - 1970

Does not fit the S10 Chassis or any other truck or full Size cars. All disc brake kits will move your rim out toward the fender of the car up to 3/4" depending on your style rims. It is hard to say how much total offset it will be as all rims are not standard.

Does not fit MOSER or Currie, or Aftermarket Rear Ends

compatible for GTO, Olds, Cutlass, 442 customers please read. You Must turn down the axles for the inner diameter to fit over the hub.

Specification

Works on C-Clip ends only.
Each rotor is drilled compatible for GM 5 x 4.75'' w/ 7/16'' stud bolt patterns.
Maximum diameter of 6.11" to fit rotor hat.
.050x45 Degree Chamfer.
2.786" max register axle.
Fits 15" or larger rims，Does not Fit 14" Rims

Package included

Multi-Pattern 11" Drilled & Slotted Rotors
Large compatible for GM Powder Coated RED Calipers with built in emergency brake (originally off of 1979 compatible for Cadillac Eldorado)
MKD84 Pads Included
Caliper Brackets & Spacers
Bracket Hardware
Stainless Steel Braided Hoses
Caliper Brackets
Emergency Brake Cables

Feature

Works on C-Clip or non C-Clip rear ends.
Each rotor is drilled compatible for GM 5 x 4.75'' w/ 7/16'' stud bolt patterns.
ALL NEW PARTS, NOTHING REBUILT OR RE-Compatible for MAN!!
Fits A- body compatible for GM Vehicles, compatible for Chevelle, or any mid sized compatible for Chevy passenger car with a 10/12 bolt pattern & non-staggered shocks.

Note

Double check the ends of your axle before ordering. Some 10/12 rear ends will have to modify the axle or rotor opening to get the rotor to fit.
Must have a 1.125" bore master and disc/disc valve to work correctly. This won't work with your disc/drum master and valve.