Turbo Charger compatible for AUDI A4 A5 Q5 A6 compatible for VW Volkswagen Passat 2.0 TFSI 2009-2012 06H145702G 06H145702L

  • * OEM-Quality. Direct Replacement
  • * Ductile Iron QT450-10 - High temperature resistance (up to 700℃)
  • * K418 Alloy - Stable & High Oxidation & Temperature Resistance(up to 900℃)
  • * Cast Aluminium Blade - Good Air Tightness & Corrosion Resistance
Stock In Stock
Item Number 3002050108

MORE OPTIONS

Combination offer

  • A
  • B
  • C
  • D
  • E
  • F
  • G
GGT06H145701Q
GGT06H145701Q
1
OEM-quality and size with little modification
2
Turbine housing uses cast iron withstand temperatures up to 700℃
3
Steel Turbine Wheel made from the special K418 alloy to achieve high oxidation resistance and stability under high temperatures up to 900℃
4
Cast aluminium blades with good gas tightness and corrosion resistance

Introduction

Looking to boost your car's horsepower? Is your car's original turbocharger not performing well or need replacing? Maxpeedingrods stocks all the best OEM-quality turbochargers and turbo parts to give your car the power, performance, and reliability you deserve. Maxpeedingrods aftermarket replacement turbos provide the perfect solution by delivering a high-quality turbo at a budget-friendly price.

Application

2009-15 Compatible forAudi A4, A4 Avant, Quattro Avant with CDNB,CDNC, CAEA, CAEB, CFKA Engine
2009-15 Compatible for Audi A5 Coupe, A5 Sport back with CDNB,CDNC, CAEA, CAEB, CFKA Engine
2010-15 Compatible for Audi A5 Cabriolet with CDNB,CDNC, CAEA, CAEB, CFKA Engine
2009-15 Compatible for Audi Q5 2.0L, S4 Avant, S5 Coupe, Sport back with CDNB,CDNC, CAEA, CAEB, CFKA Engine
2008- Compatible for Audi A5 Coupe 3.2L with CDNB,CDNC, CAEA, CAEB, CFKA Engine
2008-15 Compatible for Audi A4, S4 with CDNB, CDNC, CAEA, CAEB, CFKA Engine
2008-15 Compatible for Audi A5, S5 with CDNB, CDNC, CAEA, CAEB, CFKA Engine
2008-15 Compatible for Audi A6 with CDNB, CDNC, CAEA, CAEB, CFKA Engine
2008-15 Compatible for Volkswagen Passat with CDNB, CDNC, CAEA, CAEB, CFKA Engine
2008-15 Compatible for Seat Exeo with CDNB, CDNC, CAEA, CAEB, CFKA Engine
P.S. cannot Compatible forCompatible for Audi A4 Quattro Base Sedan 4-Door 2.0L 1984CC 121Cu. In. l4 GAS DOHC 2012

OE/Part number

06H145702L , 06H 145 702 L , 06H 145 702L,
06H145702LV ,06H145702LX,
06H145702S , 06H 145 702 S , 06H 145 702S,
06H145702SV , 06H145702SX,
06H145702G , 06H 145 702 G ,06H 145 702G,
06H145702GV , 06H145702GX,
06H145702Q ,06H 145 702 Q , 06H 145 702Q ,
06H145702QV ,06H145702QX
06H145702R , 06H 145 702 R , 06H 145 702R ,
06H145702RV , 06H145702RX
06H145702T, 06H 145 701 T , 06H 145 701T ,
06H145702TV,06H145702TX
53039700291, 5303-970-0291
53039880291, 5303-988-0291,
OE confirmation:
To identify your turbocharger, you must know the original part number of the turbocharger manufacturer. It is usually engraved on a plate or simply knocked out on the compressor housing.
It is also possible to search for the original manufacturer's number (OEM, OE) of the vehicle in the catalog.
Part Number. This is the original turbocharger number, the number that is provided directly by the turbocharger manufacturer (Garrett, BorgWarner, IHI, compatible for Mitsubishi and so on).
OEM or shortly OE (original equipment manufacturer). This is the vehicle manufacturer number (Compatible for Mercedes, compatible for Audi, Ford, VW, and so on).
Both numbers are usually, but not always, present on the turbocharger. In our catalog both numbers are stored, but high priority is given to the turbo manufacturer number (Part Number). We recommend that you search for a suitable turbocharger for this particular number.
STEP ONE: Clean the plate or casing. It is very difficult to see the number, so the area needs to be washed or cleaned with a cleaner.
STEP TWO: Determine the original turbocharger number. Each brand of the turbocharger has its own number. Here are a few examples (select the manufacturer of your turbocharger).

Specification

Turbo Model: RHF5
Engine Code:CDNB, CDNC, CAEA, CAEB, CFKA, TFSI
Cooling Type: Water Cooling
Bearing Type: Floating Bearing
Thrust Bearing: 360 degrees
Horsepower: 155KW/211PS
Condition: Brand New
Warranty: one year warranty for any manufacturing defect
Accessories: You will get exactly as shown in the picture above

Feature

Product Material:
1. Turbine housing :Ductile iron QT450-10 shell with high-temperature resistance up to 700 degrees Celsius
2. Steel Turbine Wheel:Made from the special K418 alloy to achieve high oxidation resistance and stability under high temperatures up to 900 degrees Celsius
3. compressor wheel/blades:Cast aluminium with good gas tightness and corrosion resistance
4. OEM-quality and size with little modification
product Feature:
1. Excellent Design:
Excellent Design And Processing and durable floating bearing structure + high-precision blade dynamic balance
2. High Temperature Resistance:
special K418 alloy Turbine Wheel can withstand exhaust temperature Above 900°
ductile iron QT450-10 Turbine housing Can withstand temperatures up to 700℃
3. High Efficiency:
High efficiency and low inertia intake and exhaust blades can greatly reduce turbo lag
4. Durable:
Water-cooled/oil-cooled structure extends turbine service life
5. 100% BALANCING TEST:
This Turbocharger you will receive has been balanced using the VSR machine technology.

Installation Suggestions

About Turbo failure:
The 6 most common failures are:
1. Oil starvation
2. Oil contamination
3. Impact damage
4. Blocked Engine breather
5. Over speeding of shaft and wheel
6. Hot shut down
Common causes of turbocharger failure:
1. Improper Lubrication / Lack of maintenance
2. Foreign object damageOverspeeding
3. Excessive oil pressure
4. High mileage engine
5. Engine Lacks Power
The following situation indicate the turbo failure:
1. Black Exhaust Smoke
2. Excessive Engine Oil Consumption
3. Blue Exhaust Smoke
4. Turbo Noisy
5. Cyclic sound from turbo
6. Oil Leak from compressor seal
7. Oil Leak from turbine seal
highly suggest you find professional mechanic to help you install it, here are somecheck list before installation.
1. Replace oil supply lines and fittings. These lines often become plugged with decomposed oil which restricts oil flow and drainage.
2. Do not used silicone or thread tape
3. Make sure all openings to turbo are open and not plug or capped off.
4. Shut off fuel or disable ignition and crank the engine for at least 15 seconds or until oil pressure is raised
5. Allow engine to fast idle (1,000 RPM) for 3 - 5 minutes to compatible for Seat turbo seals
6. Always let engine idle for 3 -5 minutes before shut down, otherwise the turbo will continue to spin without oil lubrication and pressure
7.When changing oil, be sure to prime oil filter

Note

*Please check the Turbo Model, Turbo Part Number and OEM Part Number on your original Turbo to make sure this turbo is the right one for your engine. If you are not sure about these information, Please feel free to contact us*Professional installation is highly recommended (No Instruction Included)

Write a review

Add photos(0/4)

Note: HTML is not translated!
    Bad 
 Good

Enter your destination to get a shipping estimate.


CONTINUE
*

*Please select a category!

DOWNLOAD MAXPEEDINGRODS OFFICIAL App FOR AN ENHANCED EXPERIENCE:

Search "maxpeedingrods" on Google Play or the Apple App Store for downloads

Official Quick Customer Support

Get timely assistance through our official support channel for a seamless experience

Curated Automotive Content Community

Explore hot car topics, connect with enthusiasts, and share favorites

Smart Control

Conveniently manage home devices remotely, such as air heaters and inverter generators

Recommended By
 
"This one has the Billet wheel on it while the other one has the cast and this should spin a lot more efficiently."
--YoungStatic
152K subscribers
 
 
"We're at 16 pounds of boost right now and it's making 500 horsepower so I'm really happy with it."
--Texas Honda Channel
44.7K subscribers
 
 
"This is cnc machined and generally billet wheels such as this one it'll keep the charge temperatures cooler which theoretically would make more horsepower."
--Matthew Chevalier
26.5K subscribers
 
 
"More durable, probably gives you more power and it looks cool in your engine bay."
--FRANCHIZE-EK3 (REDGEAR
14.8K subscribers
 
 
"These turbos now are absolutely sick and reliable I know people that have ran these 200 300 kilowatts and are still running them no issues."
--Rex H
13.1K subscribers
 
 
"I've ran numerous nine second passes with these turbos and have had no problems with them."
--Robby V's Garage
13.1K subscribers
 
 
"This appears to be a nice unit, that will be a good step towards boosting my Iroc-Z with a $200 Turbo!!!"
--GreenLightFilming
47.2K subscribers
 
 
"Yeah it looks like it's a pretty good turbo it's got the the gold Billet upgraded wheels that all the new Max speeding rods high performance turbos have and I believe they're balanced as well yeah it's balanced."
--Rex H
13.1K subscribers
 
Please login or create an account to view
and download the installation.

LOGIN

REGISTER

Forgot password

Login with Email Account

Add to cart successful

view cart Check out