For GT2871 GT2860 SR20 CA18DET Upgrade Turbo Tubocharger 350HP 0.6 A/R 0.64 A/R 5-Bolt Flange Universal Oil+Water Cooling

  • * Fitment: Perfect for 1.5L-2.0L engine any 4 cylinder engines
  • * Horse Power: Capable of boosting horse power up to 350BHP. This is a cost-effective turbocharger that will increase the users car's power output by 20-40%.
  • * Turbine Housing Material: Ductile Iron QT450-10; temperature resistant up to 700℃
  • * Turbine Impeller Material: K418 Alloy; high oxidation resistance & stability (resistance up to 900℃)
  • * Cast Aluminium Blades: Great airtight seal, airflow, light weight, and corrosion resistant
  • * Excellent Design: Durable floating bearing structure & high-precision blade dynamic balance
  • * 100% Balancing Test: This turbocharger you will receive has been balanced using the VSR machine technology
Stock In Stock
Item Number 3002032639

Combination offer

  • A
  • B
  • C
  • D
  • E
  • F
  • G
Gfor GT2871
Gfor GT2871
1
Cost effective turbocharger give your car 20-40% power than a non-turbo car of the same year, make and model
2
Ductile Iron QT450-10, the material used for the exhaust housing, is temperature resistant up to 700℃
3
K418 Alloy, the material used for the exhaust impeller, has high oxidation resistance & stability (resistance up to 900℃)
4
The cast aluminium blades are great airtight seal, airflow, light weight, and corrosion resistant

Introduction

Are you trying to put together a cost effective turbocharger system for your vehicle? You should know a turbocharged car has about 20-40% more total power than a non-turbo car of the same year, make and model. Well, Maxpeedingrods for GT2871 universal turbocharger is excellent for single turbo applications for 1.5-2.0L engine. Don't hesitate to get a turbo to boost your car's power.

Application

Universal for Turbo Manifold with T25 Flange(T28 Flange can be converted to T25 Flange, Adapter is needed).
Perfect for all 1.5L-2.0L engine,for all 4 cylinder
Horse Power: Boost Horse Power up to 350BHP

Specification

Exhaust Inlet Flange: Standard T25 Flange
Exhaust Outlet Flange: 5-Bolt
Turbine Side:
Turbine Trim: 76.3
Turbine A/R: 0.64
Turbine Inducer Diameter: 53.8mm
Turbine Exducer Diameter: 47mm
Compressor Side:
Compressor Trim: 48
Compressor A/R: 0.60
Compressor Inducer Diameter: 49.2mm
Compressor Exducer Diameter: 71 mm

Bearing Type: Wet Float
Cooling Type: Water + Oil Cooled
Wastegate: Internal Wastegate
Oil Restrictor: Yes
Oil Restrictor size:inside diameter 2mm
Oil Inlet: M12*1.25
Oil Outlet:M14 & 2*M8*1.25
Water: M14*1.5
Oil Drain Thread Pitch: 40mm
Water Thread Size: M14*1.5
Horse Power: Boost Horse Power up to 350BHP
Turbo Type: Individual
Condition: 100% Brand New
Accessories: You will get exactly as shown as picture above
package size:26x24x22cm
package weight:7250g

Feature

1)Product Material:
1. Turbine housing:Ductile iron QT450-10 shell with high-temperature resistance up to 700 degrees Celsius.
2. Steel Turbine Wheel:Made from the special K418 alloy to achieve high oxidation resistance and stability under high temperatures up to 900 degrees Celsius.
3. Compressor housing:ZL104 aluminum.
4. Compressor wheel/blades:
- Cast Aluminium with good gas tightness and corrosion resistance.
5. Capable of Boosting Horse Power up to 350 BHP.
2)Product Feature:
1. Excellent Design:
Excellent Design And Processing and durable floating bearing structure + high-precision blade dynamic balance.
2. Durable:
Water-cooled/oil-cooled structure extends turbine service life.
3. 100% BALANCING TEST:
This Turbocharger you will receive has been balanced using the VSR machine technology.

Installation Suggestions

About Turbo failure:
The 6 most common failures are:
1. Oil starvation
2. Oil contamination
3. Impact damage
4. Blocked Engine breather
5. Over speeding of shaft and wheel
6. Hot shut down
Common causes of turbocharger failure:
1. Improper Lubrication / Lack of maintenance
2. Foreign object damageOverspeeding
3. Excessive oil pressure
4. High mileage engine
5. Engine Lacks Power
The following situation indicate the turbo failure:
1. Black Exhaust Smoke
2. Excessive Engine Oil Consumption
3. Blue Exhaust Smoke
4. Turbo Noisy
5. Cyclic sound from turbo
6. Oil Leak from compressor seal
7. Oil Leak from turbine seal
Highly suggest you find professional mechanic to help you install it, here are somecheck list before installation.
1. Replace oil supply lines and fittings. These lines often become plugged with decomposed oil which restricts oil flow and drainage.
2. Do not used silicone or thread tape
3. Make sure all openings to turbo are open and not plug or capped off.
4. Shut off fuel or disable ignition and crank the engine for at least 15 seconds or until oil pressure is raised
5. Allow engine to fast idle (1,000 RPM) for 3 - 5 minutes to compatible for Seat turbo seals
6. Always let engine idle for 3 -5 minutes before shut down, otherwise the turbo will continue to spin without oil lubrication and pressure
7.When changing oil, be sure to prime oil filter

Notice

* Replace, repair or reconnect air cleaner element per manufacturer's manual to avoid compressor wheel damage.
* Make sure the oil drain line is lower than the turbo itself.
* Gasoline car must install a water cooling device to avoid overheating.
* Ensure exhaust outlet are well sealed by welding.
* Please check the specifications carefully before buying. If you are not sure about these information, please feel free to contact us.
* This is universal application turbo, so modification might be required for some vehicles.
* Professional installation is highly recommended(No Instruction Included).


Warranty: one year warranty for any manufacturing defect

Write a review

Add photos(0/4)

Note: HTML is not translated!
    Bad           Good

Enter your destination to get a shipping estimate.


CONTINUE
*

*Please select a category!

Recommended By
 
"This one has the Billet wheel on it while the other one has the cast and this should spin a lot more efficiently."
--YoungStatic
152K subscribers
 
 
"We're at 16 pounds of boost right now and it's making 500 horsepower so I'm really happy with it."
--Texas Honda Channel
44.7K subscribers
 
 
"This is cnc machined and generally billet wheels such as this one it'll keep the charge temperatures cooler which theoretically would make more horsepower."
--Matthew Chevalier
26.5K subscribers
 
 
"More durable, probably gives you more power and it looks cool in your engine bay."
--FRANCHIZE-EK3 (REDGEAR
14.8K subscribers
 
 
"These turbos now are absolutely sick and reliable I know people that have ran these 200 300 kilowatts and are still running them no issues."
--Rex H
13.1K subscribers
 
 
"I've ran numerous nine second passes with these turbos and have had no problems with them."
--Robby V's Garage
13.1K subscribers
 
 
"This appears to be a nice unit, that will be a good step towards boosting my Iroc-Z with a $200 Turbo!!!"
--GreenLightFilming
47.2K subscribers
 
 
"Yeah it looks like it's a pretty good turbo it's got the the gold Billet upgraded wheels that all the new Max speeding rods high performance turbos have and I believe they're balanced as well yeah it's balanced."
--Rex H
13.1K subscribers
 
Please login or create an account to view
and download the installation.

LOGIN

REGISTER

Forgot password

Login with Email Account