2pcs MacPherson Struts Spring Compressor 300mm WITH DETENT PINS.
1. Lubricate both main shafts with oil
2. Align the hooks with the safety pins backed off so the hooks will fit over the spring
3. Position both set of hooks 180° a part, opposite each other
4. Push safety pins in the lock position on hooks
5. Using a 3/4"or 19mm socket and ratchet turn the main shaft compressing the strut spring enough to safely remove the fastener nut holding the cartridge
2 x MacPherson Struts Spring Compressor
Enter your destination to get a shipping estimate.