Maxpeedingrods 24 Ways Damper Height Adjustable Coilovers compatible for BMW sedan E36 1990-1998 lowering kit

Combination offer

  • A
  • B
  • C
  • D
  • E
  • F
  • G

Introduction

MaXpeedingRods-B3 series(also called MaXpeedingRods-SLC) based on MaXpeedingRods-B2 series(also called MaXpeedingRods-SNA) coilovers, which is also height adjustable but adds damping adjustment ability by a knob on the top of the shaft. They are also made for street use, but the 24 level rebound damping control allows you the ability to perfectly dial in your coilover setup. You will experience better ride quality in all road conditions.

Application

Compatible for BMW 3 (E36) 4-door sedan 316i; 318i; 318is; 320i; 323i; 325i; 325is; 328i; 318tds; 325td; 325tds; (09/1990-12/1998) 

Compatible for BMW 3 (E36) 2-door coupe 318is; 316i; 320i; 323i; 323is; 325i; 328i; 328is(09/1991-04/1999)

Compatible for BMW 3 Convertible (E36) 318i; 320i; 323i; 325i; 328i; (03/1993-04/1999)

Compatible for BMW 3 Touring (E36) 5-door wagon 316i; 318i; 318tds; 320i; 323i; 325tds; 328i (08/1994-12/1999)

Compatible for BMW Z3 (E36) Coupe & Roadster 1996-2002

Specification

Front top mounts: pillow ball top mount with camber plate Rear top mounts: pillow ball Damping: 24 levels rebound damping adjustable
Spring rate Front: 8 kg/mm (448 lbs/in)
Spring rate Rear: 7 kg/mm (392 lbs/in)
Spring length Front: 180mm
Spring length Rear: 183mm
Adjustable height: lowering 1-3inch
Coilover overall length Front: 560mm-683mm
Coilover overall length Rear: 450mm-535mm
Shock type: Twin tube
Spring Preload: 7-10 mm
Color: red

Package included

complete coilovers 2 front and 2 rear
a pair wrench for height adjustment

Dimension

weight: 27380g
size: 71*51*21 cm

Feature

1. Lowered height adjustment from 1''-3'' which allow lower center of gravity and also add a more aggressive stance
2. A 24 rebound damping adjustment level allows you the ability to perfectly dial in your coilover setup. You will experience better ride quality in all road conditions.
3. Twin-Tube structure allows sufficient stroke within the shock absorber
4. Separate height adjustment does not affect damper stroke
5. High Tensile performance spring – STRESS TESTED OVER 600,000 times while the spring distortion is less than 0.04%. Plus, the special surface treatment improves the durability and performance.
6. Height Adjustment tools included
7. Camber plate top mounts help to eliminate the need for a separate camber kit
8. Pillow ball top mount - It improves the steering feel and response
9. Most pieces in our Coilover systems, including mounts, collars and spring perches, are designed from 6061-T6 Billet Aluminum resulting in lightweight, durable and rust resistant components.
10. Full rebuildable


Warranty: one year warranty for any manufacturing defect

Write a review

Add photos(0/4)

Note: HTML is not translated!
    Bad 
 Good

Enter your destination to get a shipping estimate.


CONTINUE
*

*Please select a category!

Video:The Most Detailed Coilover Installation Guide For BMW E36

Here, we prepare a detailed MaXpeedingRods coilover installation guide. It’s kindly shared by one of our friends Jon Drives, who installed the coilover on his 1996 e36 328i, check the whole video below.

Below is a step-by-step installation guide for reference. 

Install the front piece

Step 1: Get the car up in the air and pop the hood.
Step 2: Take off the three 18 millimeter bolts in the old suspension.

Step 3: Take off the three 13 millimeter bolts inside the engine bag on the top.

Step 4: Slide out the brake lines and speed sensors in the front in case that entire shocks come out.
Step 5: Put in the coilover, pay attention to the orientation of the camber adjustment plate.
Step 6: Unbolt the four hex bolts, you can slide the entire top at one way or another adding or taking out some camber.

Step 7: Lift up the lower control arm and lift the whole assembly up into the place that is the most convenient to you.
Step 8: Lowered the coil over a little bit to adjust the adjustability whenever you get it all fully installed.
Step 9: Get all bolts bolted up on all four corners.

Step 10: Adjust the hight of the coilover, use the spanner wrench offered by MaXpeedingRods to crack the jam nut loose when it’s tight, or you can take your hand and twist the top part if it’s not that tough.

Install the rear piece

Step 11: Get to the two bolts on the top of the back-shop.
Step 12: Remove the battery and the piece of carpet carefully.
Step 13: Take off the back of the shock.
Step 14: Press down and pull it to get the old spring out.

Step 15: Swap over the rubber top hat onto the new spring.

Step 16: Adjust to make the spring compress less so it will be easier to get it into the car.

Step 17: Unthread the sleeve a little bit to leave more room to work with, and it will be eaiser to adjust as you need once it’s got up in the car.

Step 18: Get the coilover in the car properly.

DISCLAIMER: This install guidance was authorized by Jon Drives and this install guidance is for reference purposes only. Always follow professional instructions on how to set this up correctly, MaXpeedingRods is not responsible for any damage caused by inappropriate installation.






















DOWNLOAD MAXPEEDINGRODS OFFICIAL App FOR AN ENHANCED EXPERIENCE:

Search "maxpeedingrods" on Google Play or the Apple App Store for downloads

Official Quick Customer Support

Get timely assistance through our official support channel for a seamless experience

Curated Automotive Content Community

Explore hot car topics, connect with enthusiasts, and share favorites

Smart Control

Conveniently manage home devices remotely, such as air heaters and inverter generators

Recommended By
 
"You can tell a huge difference from these coilovers from the older ones."
--DBGarage
65.1K subscribers
 
 
"These have a new design of the damper and some racing oil that is in it and they do have customizable spring rates. it's riding awesome I am really impressed with this car."
--Texas Honda Channel
44.7K subscribers
 
 
"The T7 maxpeedingrods coilover uh feels freaking great compared to the sp1 compared to the gray body the red body or even the yellow body coilover and uh you know I most definitely do recommend it remember I only use things I know work and I only recommend stuff that I do know works."
--YoungStatic
152K subscribers
 
 
"I really like the way it felt 11 and 7K. this set is it says occasional track use more spirited driving if that's what you're going to use it for then. I really like the way they feel I've only driven on one event so far driving."
--Garage Built Hondas
89.5K subscribers
 
 
"Super impressed. I'm not hearing any clunking noises.These rides are incredible."
--Texas Honda Channel
44.7K subscribers
 
 
"Well there it is guys it's definitely not slammed like i was going for it, but i will say i can definitely get it to go a lot lower I know the front has more adjustment in it,and the rear right now, is all the way down but i can go ahead adjustment collar that we put underneath the spring i can take that out and that will probably give us another half inch."
--DBGarage
65.1k subscribers
 
 
"The lock adjusting tool here is much more robust than on the original style. here you can see how small these are. it's really hard to get some good leverage on them. the newer ones much much larger and really give a nice wrap around of the collar itself. so definitely a nice upgrade."
--Reignited - Cycle and Automotive
58.2K subscribers
 
 
"I think it looks great, the front & back are lowered."
--79th Productions
301K subscribers
 
 
"It is your tire size choice is perfect, it's awesome on these cars it looks so good it looks like it actually makes a little bit of power even though it's an automatic single cam at the moment."
--Tuning by Nick
27.1k subscribers
 
 
"Speaking of spring rates, these do have tons of different options for any application you may need, from a stiff stance setup to a more race-inspired setup."
--DrivenFilms Photography
14.1K subscribers
 
 
"They have in it the new valves inside the chamber of the shock it's it's transferring it fluid a lot better man it's a smoother more quality ride i didn't even really look to see what the spring rate was on them but this thing is riding really good."
--DrivenFilms Photography
14.1K subscribers
 
Please login or create an account to view
and download the installation.

LOGIN

REGISTER

Forgot password

Login with Email Account

Add to cart successful

view cart Check out