12V 2KW Diesel Heater Tank Vent MotorHomes for Van Caravan for RV for Garage LCD Warm

Combination offer

  • A
  • B
  • C
  • D
  • E
  • F
  • G

Introduction

Maxpeedingrods Air Heaters only need 12V power supply working in extreme temperature. Air Heaters are devices used to heat air. Maxpeedingrods Air Heaters are smooth, automatic room temperature control with temperature pre-set facility. Our heaters are suitable for longer periods of operation with low fuel and power consumption. Maxpeedingrods manufactures a full line of air heaters that offer performance and versatility in medium to low temperature applications which fit for various models.

Application

Compatible for Motorhomes, Campervans, Caravans (also known as travel trailers and camper trailers), Fifth-wheel Trailers, Popup Campers and Truck Campers, Small Truck, Big Truck, Light Truck, Heavy Truck, Pickup, Van,Bus,Car,SUV, Boat, Forklift, Electric Tricycle, Engineering Vehicle, Yacht.

Note: There is a film on the screen, please tear it off when using. But also pay attention to the switch actually has two layers of protective film, you just need to slightly tear off the upper layer of film, the film below can not be torn off, otherwise there will be dust into the switch, resulting in switch damage.

Exhaust gas contains CO, exhaust pipes must be installed outdoors or outside your vehicle.

Specification

Condition: New

Brand: maXpeedingrods

Item Size: 340x115x115mm

Gross weight: 6.7KG

Warranty: one year

Fuel Tank: 10L 

Interchange Part Number: 2KW diesel Air Heater

Rated Voltage: 12V 

Custom Bundle: Yes

Material: Metal & Plastic 

Bundle Description: Just like the picture

Color: Black & Compatible for White 

Product Type: Air Diesel Heater

Switch type: LCD Switch 

Important Notice: Package Included: Just like the picture, Professional installation required

Heater Power: 1KW-2KW 

Fuel Gasoline: Diesel

Sub-Type: Diesel Heater 

Car Air Conditioning Type: Heating

Applications: Trucks, Van, RV Trailers, Cars, Motorhomes, etc 

Fuel Consumption(L/h): 0.14-0.35

Working Temperature of the Heater: -40℃~+50℃

Manufacturer Part Number: YW2CD3 Working Temperature of the Oil pump:: -40℃~+40℃

UPC: Does not apply

Package included

1 x Parking Heater

1 x LCD Switch

1 x Remote Control

1 x Exhaust Silencer ( for car use only)

1 x  Diesel Tank (10L)

1 x Main wiring Bundle

1 x T-Piece

1 x Oil pump

1 x Oil pump connection wire

1 x Filter

1 x Oil pipe

1 x Inlet air pipe (aluminium alloy, 50cm length)

1 x Exhaust pipe (stainless steel, 60cm length)

1 x Gasket

1 x Reducing tee

2 x Terminal

1 x Oil pump clip

1 x Inlet air pipe clip

1 x Exhaust pipe clip

2 x Inlet air pipe fixing clip

2 x Exhaust pipe fixing clip

6 x Oil pipe joint

2 x Oil pipe clip

4 x Washer

4 x Nut

4 x Self tapping screw

1 x Nylon cable ties

1 x Oil suction pipe

1 x Air inlet hood

1 x Metering oil pump

1 x Air Outlet Pipe (aluminium alloy)

1 x 1 x Air filter

1 x fixed plate

1 x Manual

Features

1. Wide application.This diesel air heater can be applied for heating the cab of various diesel mechanical vehicles such as cars, buses, RVs, trucks, engineering vehicles, etc. 

2. ENERGY SAVING- The optimized frequency conversion ECU accurately controls the injection frequency of the oil pump, and controls the intake air amount with the precise speed to extend the service life of the heater. 

3. Low fuel and power consumption, suitable for longer periods of operation. 

4. More comfort through wide control range, quiet night-time operation.

5. Fully electronic microprocessor control.

6. Diagnostic system. 

7. Power stage to cut heating times.

8. REDUCED NOISE- Effectively reduce noise through blower speed control, silent fan, silent oil pump. The silent fan sleeps peacefully, and the metering oil pump adopts an improved low frequency pulse with low vibration.

9. Low maintenance, easy to service.

10. Can be operated whilst on the move.

11. Fuel supplied from the vehicle's own tank (diesel only).

12. Small and compact design for easy and space-saving installation within the interior or even under the floor

13. Independent heating device: Blow out warm air independently without causing wear and tear or carbon deposits in the engine, which can extend engine life by 30%.

14. Keep constant temperature: the intelligent overheating sensor can prevent the heater from running dry.    

15. Can eliminate the window frost.

16. Environmentally product, low emissions, low fuel consumption; heater exhaust emissions to meet euro IV engine emissions requirements.

17. Can dismantle to a new car when replace vehicle.

18. Volatile technology, by the ceramic ignition plug will fuel heating evaporated into gas, fast ignition, full combustion.

19. Qualification certificate to ensure your safe travel, CE(Europe) /RCM(Australia) /ABE(Germany)   

20. Standard accessory.With a complete mounting kit - including all mounting screws, which means all installation kit and instruction are included. Making it easy to install and use.

Notice

* Due to the manual measurement and different measurement methods, please allow 1-3cm deviation.

* Professional installation is highly recommended (No Instruction Included)

* For any needs please contact us.

* For safety, please stay away from flammable materials

* Keep dry to avoid damage to accessories

* Can be used in inside door,but the exhasut pipe should be in outside. 

Write a review

Add photos(0/4)

Note: HTML is not translated!
    Bad           Good

Enter your destination to get a shipping estimate.


CONTINUE
*

*Please select a category!

Install & Use Attention
1、Try to rotate the impeller to ensure that it can rotate freely and smoothly. If it cannot rotate freely, you need to use a tool to adjust the gap of the impeller.
2、The heater should be directly connected to the power supply to ensure that the battery is above 80A, the power supply current is above 20A, and the voltage is 11.5~12.8V.
3、The intake pipe and exhaust pipe should not be bent too much to keep the ventilation smooth, and ensure that at least 10cm or 0.79in in front of the air inlet
4、When the heater is turned on for the first time, it needs to match with remote control and lead the oil to the main engine.
5、Please gently tear off the protective film on the top of the LCD screen before use.
6、The distance between the fuel pump and the machine should be 1.5~2m.(For split machine)
7、Please provide the machine with good quality diesel.
8、EXhaust pipes must be installed outdoors or outside your vehicle.
9、When assembling the machine, don't reverse the direction of the oil pump.
10、When installing the heater, it must be horizontally with the outlet facing down.
11、When the machine first started, because there was no diesel oil inthe tube, if themachine could not sense the oil in two minutes, itwould stop automatically.After the machine stops running, restart it.
12、When you turn off the heater, it will continue to run until there hasno fuel in it.Do not forcibly disconnect the power supply, or it will damage the machine.
13、Turn the fan on about 1.5min, and the oil pump starts to work.













Please login or create an account to view
and download the installation.

LOGIN

REGISTER

Forgot password

Login with Email Account